PROJ-FILE-FMT=2
PROJ-DRIVER-NAME='_SPECIAL No Projector (Rev B).prjdrv'
PROJ-NAME='No Projector'
PROJ-DRIVER-REV='Rev B' ; corrected power on timer/warmup delay error - 2/2011 BT

; This driver is for the NRC when no display device is to be controlled by the NRC itself

DOC-REV-USER-MESSAGE['Rev B'] = "This driver is for use with the NRC when it will not be directly controlling a display device. Please contact SP Controls Technical Support for more information."

IR-TIME-0L=786u
IR-TIME-0H=264u
IR-TIME-1L=1.836m
IR-TIME-1H=264u
PROJ-BAUD-RATE=9600,8,N,1
IRCODE['_REPEAT']=""
IRCODE['_PREFIX']="%10110"
IRCODE['_SUFFIX']="%10"
IRCODE['POWER ON']="d100m",REPEATS=1
IRCODE['POWER OFF']="d100m",REPEATS=1
RSCODE['POWER POLL']="d100m",REPEATS=1


IRCODE['SOURCE 1']="d100m",REPEATS=1
IRCODE['SOURCE 2']="d100m",REPEATS=1
IRCODE['SOURCE 3']="d100m",REPEATS=1
IRCODE['SOURCE 4']="d100m",REPEATS=1

IRCODE['VOLUME UP']="d100m",REPEATS=1
IRCODE['VOLUME DOWN']="d100m",REPEATS=1

IRCODE['HIDDEN']="d100m",REPEATS=1

BYTES-TO-QUEUE=2
POWER-POLL-INTERVAL=2.82s
POWER-POLL-TIMEOUT=940m
POWER-POLL-THRESHOLD=3
POWER-POLL-STARTBYTE=1
POWER-POLL-MATCH-ANY=False
POWER-POLL-MATCH-BYTES="'OK'"
POWER-POLL-TESTBYTE-MASK=255
POWER-POLL-DURING-WARMUP=True
POWER-POLL-DURING-LOCKOUT=False
POWER-POLL-LOCKOUT=2.82s
PROJ-USES-ABSOLUTE-VOL=True

VOL-MUTE=0
VOL-RANGE=60
VOL-FLOOR=0

IO-DOWNTIME=145m
WARM-UP-DELAY=2s
POWER-ON-DELAY=1s

IO-CANCEL-DOWNTIME-ON-RX=False
USE-MODULATION-WHEN-WIRED=False
INVERT-LINE-WHEN-WIRED=True
CARRIER-PERIOD=26.4u
CARRIER-DUTY-CYCLE=50
PROJ-MISSING-THRESHOLD=5

DEFAULT-CORE-FUNCT[REPEAT]='_REPEAT'
DEFAULT-CORE-FUNCT[PREFIX]='_PREFIX'
DEFAULT-CORE-FUNCT[SUFFIX]='_SUFFIX'
DEFAULT-CORE-FUNCT[POLL]='POWER POLL'
DEFAULT-CORE-FUNCT[ON]='POWER ON'
DEFAULT-CORE-FUNCT[OFF]='POWER OFF'
DEFAULT-CORE-FUNCT[VUP]='VOLUME UP'
DEFAULT-CORE-FUNCT[VDN]='VOLUME DOWN'
DEFAULT-SELECTION[1]='SOURCE 1'
DEFAULT-SELECTION[2]='SOURCE 2'
DEFAULT-SELECTION[3]='SOURCE 3'
DEFAULT-SELECTION[4]='SOURCE 4'
DEFAULT-HID-FUNCT[OFF]='HIDDEN'
DEFAULT-HID-FUNCT[VUP]='HIDDEN'
DEFAULT-HID-FUNCT[VDN]='HIDDEN'
DEFAULT-HID-FUNCT[1]='HIDDEN'
DEFAULT-HID-FUNCT[2]='HIDDEN'
DEFAULT-HID-FUNCT[3]='HIDDEN'
DEFAULT-HID-FUNCT[4]='HIDDEN'
DEFAULT-LOCKOUT=1s
POWER-SENSE-OPTIONS=None,Sensor
IR-WIRING-OPTIONS=IR-Emitter
PASSIVE-MODE=False